# Copyright (c) 2017 D. Richard Hipp
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the Simplified BSD License (also
# known as the "2-Clause License" or "FreeBSD License".)
#
# This program is distributed in the hope that it will be useful,
# but without any warranty; without even the implied warranty of
# merchantability or fitness for a particular purpose.
#
#---------------------------------------------------------------------------
#
# Design rules:
#
# (1) All identifiers in the global namespace begin with "wapp"
#
# (2) Indentifiers intended for internal use only begin with "wappInt"
#
if {$::tcl_version < 8.6} {package require Tcl 8.6}
# Add text to the end of the HTTP reply. No interpretation or transformation
# of the text is performs. The argument should be enclosed within {...}
#
proc wapp {txt} {
global wapp
dict append wapp .reply $txt
}
# Add text to the page under construction. Do no escaping on the text.
#
# Though "unsafe" in general, there are uses for this kind of thing.
# For example, if you want to return the complete, unmodified content of
# a file:
#
# set fd [open content.html rb]
# wapp-unsafe [read $fd]
# close $fd
#
# You could do the same thing using ordinary "wapp" instead of "wapp-unsafe".
# The difference is that wapp-safety-check will complain about the misuse
# of "wapp", but it assumes that the person who write "wapp-unsafe" understands
# the risks.
#
# Though occasionally necessary, the use of this interface should be minimized.
#
proc wapp-unsafe {txt} {
global wapp
dict append wapp .reply $txt
}
# Add text to the end of the reply under construction. The following
# substitutions are made:
#
# %html(...) Escape text for inclusion in HTML
# %url(...) Escape text for use as a URL
# %qp(...) Escape text for use as a URI query parameter
# %string(...) Escape text for use within a JSON string
# %unsafe(...) No transformations of the text
#
# The substitutions above terminate at the first ")" character. If the
# text of the TCL string in ... contains ")" characters itself, use instead:
#
# %html%(...)%
# %url%(...)%
# %qp%(...)%
# %string%(...)%
# %unsafe%(...)%
#
# In other words, use "%(...)%" instead of "(...)" to include the TCL string
# to substitute.
#
# The %unsafe substitution should be avoided whenever possible, obviously.
# In addition to the substitutions above, the text also does backslash
# escapes.
#
# The wapp-trim proc works the same as wapp-subst except that it also removes
# whitespace from the left margin, so that the generated HTML/CSS/Javascript
# does not appear to be indented when delivered to the client web browser.
#
if {$tcl_version>=8.7} {
proc wapp-subst {txt} {
global wapp
regsub -all -command \
{%(html|url|qp|string|unsafe){1,1}?(|%)\((.+)\)\2} $txt wappInt-enc txt
dict append wapp .reply [subst -novariables -nocommand $txt]
}
proc wapp-trim {txt} {
global wapp
regsub -all {\n\s+} [string trim $txt] \n txt
regsub -all -command \
{%(html|url|qp|string|unsafe){1,1}?(|%)\((.+)\)\2} $txt wappInt-enc txt
dict append wapp .reply [subst -novariables -nocommand $txt]
}
proc wappInt-enc {all mode nu1 txt} {
return [uplevel 2 "wappInt-enc-$mode \"$txt\""]
}
} else {
proc wapp-subst {txt} {
global wapp
regsub -all {%(html|url|qp|string|unsafe){1,1}?(|%)\((.+)\)\2} $txt \
{[wappInt-enc-\1 "\3"]} txt
dict append wapp .reply [uplevel 1 [list subst -novariables $txt]]
}
proc wapp-trim {txt} {
global wapp
regsub -all {\n\s+} [string trim $txt] \n txt
regsub -all {%(html|url|qp|string|unsafe){1,1}?(|%)\((.+)\)\2} $txt \
{[wappInt-enc-\1 "\3"]} txt
dict append wapp .reply [uplevel 1 [list subst -novariables $txt]]
}
}
# There must be a wappInt-enc-NAME routine for each possible substitution
# in wapp-subst. Thus there are routines for "html", "url", "qp", and "unsafe".
#
# wappInt-enc-html Escape text so that it is safe to use in the
# body of an HTML document.
#
# wappInt-enc-url Escape text so that it is safe to pass as an
# argument to href= and src= attributes in HTML.
#
# wappInt-enc-qp Escape text so that it is safe to use as the
# value of a query parameter in a URL or in
# post data or in a cookie.
#
# wappInt-enc-string Escape ", ', \, and < for using inside of a
# javascript string literal. The < character
# is escaped to prevent "</script>" from causing
# problems in embedded javascript.
#
# wappInt-enc-unsafe Perform no encoding at all. Unsafe.
#
proc wappInt-enc-html {txt} {
return [string map {& & < < > > \" " \\ \} $txt]
}
proc wappInt-enc-unsafe {txt} {
return $txt
}
proc wappInt-enc-url {s} {
if {[regsub -all {[^-{}\\@~?=#_.:/a-zA-Z0-9]} $s {[wappInt-%HHchar {&}]} s]} {
set s [subst -novar -noback $s]
}
if {[regsub -all {[\\{}]} $s {[wappInt-%HHchar \\&]} s]} {
set s [subst -novar -noback $s]
}
return $s
}
proc wappInt-enc-qp {s} {
if {[regsub -all {[^-{}\\_.a-zA-Z0-9]} $s {[wappInt-%HHchar {&}]} s]} {
set s [subst -novar -noback $s]
}
if {[regsub -all {[\\{}]} $s {[wappInt-%HHchar \\&]} s]} {
set s [subst -novar -noback $s]
}
return $s
}
proc wappInt-enc-string {s} {
return [string map {\\ \\\\ \" \\\" ' \\' < \\u003c \n \\n \r \\r
\f \\f \t \\t \x01 \\u0001 \x02 \\u0002 \x03 \\u0003
\x04 \\u0004 \x05 \\u0005 \x06 \\u0006 \x07 \\u0007
\x0b \\u000b \x0e \\u000e \x0f \\u000f \x10 \\u0010
\x11 \\u0011 \x12 \\u0012 \x13 \\u0013 \x14 \\u0014
\x15 \\u0015 \x16 \\u0016 \x17 \\u0017 \x18 \\u0018
\x19 \\u0019 \x1a \\u001a \x1b \\u001b \x1c \\u001c
\x1d \\u001d \x1e \\u001e \x1f \\u001f} $s]
}
# This is a helper routine for wappInt-enc-url and wappInt-enc-qp. It returns
# an appropriate %HH encoding for the single character c. If c is a unicode
# character, then this routine might return multiple bytes: %HH%HH%HH
#
proc wappInt-%HHchar {c} {
if {$c==" "} {return +}
return [regsub -all .. [binary encode hex [encoding convertto utf-8 $c]] {%&}]
}
# Undo the www-url-encoded format.
#
# HT: This code stolen from ncgi.tcl
#
proc wappInt-decode-url {str} {
set str [string map [list + { } "\\" "\\\\" \[ \\\[ \] \\\]] $str]
regsub -all -- \
{%([Ee][A-Fa-f0-9])%([89ABab][A-Fa-f0-9])%([89ABab][A-Fa-f0-9])} \
$str {[encoding convertfrom utf-8 [binary decode hex \1\2\3]]} str
regsub -all -- \
{%([CDcd][A-Fa-f0-9])%([89ABab][A-Fa-f0-9])} \
$str {[encoding convertfrom utf-8 [binary decode hex \1\2]]} str
regsub -all -- {%([0-7][A-Fa-f0-9])} $str {\\u00\1} str
return [subst -novar $str]
}
# Reset the document back to an empty string.
#
proc wapp-reset {} {
global wapp
dict set wapp .reply {}
}
# Change the mime-type of the result document.
#
proc wapp-mimetype {x} {
global wapp
dict set wapp .mimetype $x
}
# Change the reply code.
#
proc wapp-reply-code {x} {
global wapp
dict set wapp .reply-code $x
}
# Set a cookie
#
proc wapp-set-cookie {name value} {
global wapp
dict lappend wapp .new-cookies $name $value
}
# Unset a cookie
#
proc wapp-clear-cookie {name} {
wapp-set-cookie $name {}
}
# Add extra entries to the reply header
#
proc wapp-reply-extra {name value} {
global wapp
dict lappend wapp .reply-extra $name $value
}
# Specifies how the web-page under construction should be cached.
# The argument should be one of:
#
# no-cache
# max-age=N (for some integer number of seconds, N)
# private,max-age=N
#
proc wapp-cache-control {x} {
wapp-reply-extra Cache-Control $x
}
# Redirect to a different web page
#
proc wapp-redirect {uri} {
wapp-reset
wapp-reply-code {303 Redirect}
wapp-reply-extra Location $uri
}
# Return the value of a wapp parameter
#
proc wapp-param {name {dflt {}}} {
global wapp
if {![dict exists $wapp $name]} {return $dflt}
return [dict get $wapp $name]
}
# Return true if a and only if the wapp parameter $name exists
#
proc wapp-param-exists {name} {
global wapp
return [dict exists $wapp $name]
}
# Set the value of a wapp parameter
#
proc wapp-set-param {name value} {
global wapp
dict set wapp $name $value
}
# Return all parameter names that match the GLOB pattern, or all
# names if the GLOB pattern is omitted.
#
proc wapp-param-list {{glob {*}}} {
global wapp
return [dict keys $wapp $glob]
}
# By default, Wapp does not decode query parameters and POST parameters
# for cross-origin requests. This is a security restriction, designed to
# help prevent cross-site request forgery (CSRF) attacks.
#
# As a consequence of this restriction, URLs for sites generated by Wapp
# that contain query parameters will not work as URLs found in other
# websites. You cannot create a link from a second website into a Wapp
# website if the link contains query planner, by default.
#
# Of course, it is sometimes desirable to allow query parameters on external
# links. For URLs for which this is safe, the application should invoke
# wapp-allow-xorigin-params. This procedure tells Wapp that it is safe to
# go ahead and decode the query parameters even for cross-site requests.
#
# In other words, for Wapp security is the default setting. Individual pages
# need to actively disable the cross-site request security if those pages
# are safe for cross-site access.
#
proc wapp-allow-xorigin-params {} {
global wapp
if {![dict exists $wapp .qp] && ![dict get $wapp SAME_ORIGIN]} {
wappInt-decode-query-params
}
}
# Set the content-security-policy.
#
# The default content-security-policy is very strict: "default-src 'self'"
# The default policy prohibits the use of in-line javascript or CSS.
#
# Provide an alternative CSP as the argument. Or use "off" to disable
# the CSP completely.
#
proc wapp-content-security-policy {val} {
global wapp
if {$val=="off"} {
dict unset wapp .csp
} else {
dict set wapp .csp $val
}
}
# Examine the bodys of all procedures in this program looking for
# unsafe calls to various Wapp interfaces. Return a text string
# containing warnings. Return an empty string if all is ok.
#
# This routine is advisory only. It misses some constructs that are
# dangerous and flags others that are safe.
#
proc wapp-safety-check {} {
set res {}
foreach p [info command] {
set ln 0
foreach x [split [info body $p] \n] {
incr ln
if {[regexp {^[ \t]*wapp[ \t]+([^\n]+)} $x all tail]
&& [string index $tail 0]!="\173"
&& [regexp {[[$]} $tail]
} {
append res "$p:$ln: unsafe \"wapp\" call: \"[string trim $x]\"\n"
}
if {[regexp {^[ \t]*wapp-(subst|trim)[ \t]+[^\173]} $x all cx]} {
append res "$p:$ln: unsafe \"wapp-$cx\" call: \"[string trim $x]\"\n"
}
}
}
return $res
}
# Return a string that descripts the current environment. Applications
# might find this useful for debugging.
#
proc wapp-debug-env {} {
global wapp
set out {}
foreach var [lsort [dict keys $wapp]] {
if {[string index $var 0]=="."} continue
append out "$var = [list [dict get $wapp $var]]\n"
}
append out "\[pwd\] = [list [pwd]]\n"
return $out
}
# Tracing function for each HTTP request. This is overridden by wapp-start
# if tracing is enabled.
#
proc wappInt-trace {} {}
# Start up a listening socket. Arrange to invoke wappInt-new-connection
# for each inbound HTTP connection.
#
# port Listen on this TCP port. 0 means to select a port
# that is not currently in use
#
# wappmode One of "scgi", "remote-scgi", "server", or "local".
#
# fromip If not {}, then reject all requests from IP addresses
# other than $fromip
#
proc wappInt-start-listener {port wappmode fromip} {
if {[string match *scgi $wappmode]} {
set type SCGI
set server [list wappInt-new-connection \
wappInt-scgi-readable $wappmode $fromip]
} else {
set type HTTP
set server [list wappInt-new-connection \
wappInt-http-readable $wappmode $fromip]
}
if {$wappmode=="local" || $wappmode=="scgi"} {
set x [socket -server $server -myaddr 127.0.0.1 $port]
} else {
set x [socket -server $server $port]
}
set coninfo [chan configure $x -sockname]
set port [lindex $coninfo 2]
if {$wappmode=="local"} {
wappInt-start-browser http://127.0.0.1:$port/
} elseif {$fromip!=""} {
puts "Listening for $type requests on TCP port $port from IP $fromip"
} else {
puts "Listening for $type requests on TCP port $port"
}
}
# Start a web-browser and point it at $URL
#
proc wappInt-start-browser {url} {
global tcl_platform
if {$tcl_platform(platform)=="windows"} {
exec cmd /c start $url &
} elseif {$tcl_platform(os)=="Darwin"} {
exec open $url &
} elseif {[catch {exec -ignorestderr xdg-open $url}]} {
exec firefox $url &
}
}
# This routine is a "socket -server" callback. The $chan, $ip, and $port
# arguments are added by the socket command.
#
# Arrange to invoke $callback when content is available on the new socket.
# The $callback will process inbound HTTP or SCGI content. Reject the
# request if $fromip is not an empty string and does not match $ip.
#
proc wappInt-new-connection {callback wappmode fromip chan ip port} {
upvar #0 wappInt-$chan W
if {$fromip!="" && ![string match $fromip $ip]} {
close $chan
return
}
set W [dict create REMOTE_ADDR $ip REMOTE_PORT $port WAPP_MODE $wappmode \
.header {}]
fconfigure $chan -blocking 0 -translation binary
fileevent $chan readable [list $callback $chan]
}
# Close an input channel
#
proc wappInt-close-channel {chan} {
if {$chan=="stdout"} {
# This happens after completing a CGI request
exit 0
} else {
unset ::wappInt-$chan
close $chan
}
}
# Process new text received on an inbound HTTP request
#
proc wappInt-http-readable {chan} {
if {[catch [list wappInt-http-readable-unsafe $chan] msg]} {
puts stderr "$msg\n$::errorInfo"
wappInt-close-channel $chan
}
}
proc wappInt-http-readable-unsafe {chan} {
upvar #0 wappInt-$chan W wapp wapp
if {![dict exists $W .toread]} {
# If the .toread key is not set, that means we are still reading
# the header
set line [string trimright [gets $chan]]
set n [string length $line]
if {$n>0} {
if {[dict get $W .header]=="" || [regexp {^\s+} $line]} {
dict append W .header $line
} else {
dict append W .header \n$line
}
if {[string length [dict get $W .header]]>100000} {
error "HTTP request header too big - possible DOS attack"
}
} elseif {$n==0} {
# We have reached the blank line that terminates the header.
global argv0
if {[info exists ::argv0]} {
set a0 [file normalize $argv0]
} else {
set a0 /
}
dict set W SCRIPT_FILENAME $a0
dict set W DOCUMENT_ROOT [file dir $a0]
if {[wappInt-parse-header $chan]} {
catch {close $chan}
return
}
set len 0
if {[dict exists $W CONTENT_LENGTH]} {
set len [dict get $W CONTENT_LENGTH]
}
if {$len>0} {
# Still need to read the query content
dict set W .toread $len
} else {
# There is no query content, so handle the request immediately
set wapp $W
wappInt-handle-request $chan
}
}
} else {
# If .toread is set, that means we are reading the query content.
# Continue reading until .toread reaches zero.
set got [read $chan [dict get $W .toread]]
dict append W CONTENT $got
dict set W .toread [expr {[dict get $W .toread]-[string length $got]}]
if {[dict get $W .toread]<=0} {
# Handle the request as soon as all the query content is received
set wapp $W
wappInt-handle-request $chan
}
}
}
# Decode the HTTP request header.
#
# This routine is always running inside of a [catch], so if
# any problems arise, simply raise an error.
#
proc wappInt-parse-header {chan} {
upvar #0 wappInt-$chan W
set hdr [split [dict get $W .header] \n]
if {$hdr==""} {return 1}
set req [lindex $hdr 0]
dict set W REQUEST_METHOD [set method [lindex $req 0]]
if {[lsearch {GET HEAD POST} $method]<0} {
error "unsupported request method: \"[dict get $W REQUEST_METHOD]\""
}
set uri [lindex $req 1]
dict set W REQUEST_URI $uri
set split_uri [split $uri ?]
set uri0 [lindex $split_uri 0]
if {![regexp {^/[-.a-z0-9_/]*$} $uri0]} {
regsub -all {[-.a-z0-9_/]+} $uri0 {} bad
error "disallowed character(s) \"$bad\" in request uri: \"$uri0\""
}
dict set W PATH_INFO $uri0
set uri1 [lindex $split_uri 1]
dict set W QUERY_STRING $uri1
set n [llength $hdr]
for {set i 1} {$i<$n} {incr i} {
set x [lindex $hdr $i]
if {![regexp {^(.+): +(.*)$} $x all name value]} {
error "invalid header line: \"$x\""
}
set name [string toupper $name]
switch -- $name {
REFERER {set name HTTP_REFERER}
USER-AGENT {set name HTTP_USER_AGENT}
CONTENT-LENGTH {set name CONTENT_LENGTH}
CONTENT-TYPE {set name CONTENT_TYPE}
HOST {set name HTTP_HOST}
COOKIE {set name HTTP_COOKIE}
ACCEPT-ENCODING {set name HTTP_ACCEPT_ENCODING}
default {set name .hdr:$name}
}
dict set W $name $value
}
return 0
}
# Decode the QUERY_STRING parameters from a GET request or the
# application/x-www-form-urlencoded CONTENT from a POST request.
#
# This routine sets the ".qp" element of the ::wapp dict as a signal
# that query parameters have already been decoded.
#
proc wappInt-decode-query-params {} {
global wapp
dict set wapp .qp 1
if {[dict exists $wapp QUERY_STRING]} {
foreach qterm [split [dict get $wapp QUERY_STRING] &] {
set qsplit [split $qterm =]
set nm [lindex $qsplit 0]
if {[regexp {^[a-z][a-z0-9]*$} $nm]} {
dict set wapp $nm [wappInt-decode-url [lindex $qsplit 1]]
}
}
}
if {[dict exists $wapp CONTENT_TYPE] && [dict exists $wapp CONTENT]} {
set ctype [dict get $wapp CONTENT_TYPE]
if {$ctype=="application/x-www-form-urlencoded"} {
foreach qterm [split [string trim [dict get $wapp CONTENT]] &] {
set qsplit [split $qterm =]
set nm [lindex $qsplit 0]
if {[regexp {^[a-z][-a-z0-9_]*$} $nm]} {
dict set wapp $nm [wappInt-decode-url [lindex $qsplit 1]]
}
}
} elseif {[string match multipart/form-data* $ctype]} {
regexp {^(.*?)\n(.*)$} [dict get $wapp CONTENT] all divider body
set ndiv [string length $divider]
while {[string length $body]} {
set idx [string first $divider $body]
set unit [string range $body 0 [expr {$idx-3}]]
set body [string range $body [expr {$idx+$ndiv+2}] end]
if {[regexp {^Content-Disposition: form-data; (.*?)\n\r?\n(.*)$} \
$unit unit hdr content]} {
if {[regexp {name="(.*)"; filename="(.*)"\r?\nContent-Type: (.*?)$}\
$hdr hr name filename mimetype]
&& [regexp {^[a-z][a-z0-9]*$} $name]} {
dict set wapp $name.filename \
[string map [list \\\" \" \\\\ \\] $filename]
dict set wapp $name.mimetype $mimetype
dict set wapp $name.content $content
} elseif {[regexp {name="(.*)"} $hdr hr name]
&& [regexp {^[a-z][a-z0-9]*$} $name]} {
dict set wapp $name $content
}
}
}
}
}
}
# Invoke application-supplied methods to generate a reply to
# a single HTTP request.
#
# This routine uses the global variable ::wapp and so must not be nested.
# It must run to completion before the next instance runs. If a recursive
# instances of this routine starts while another is running, the the
# recursive instance is added to a queue to be invoked after the current
# instance finishes. Yes, this means that WAPP IS SINGLE THREADED. Only
# a single page rendering instance my be running at a time. There can
# be multiple HTTP requests inbound at once, but only one my be processed
# at a time once the request is full read and parsed.
#
set wappIntPending {}
set wappIntLock 0
proc wappInt-handle-request {chan} {
global wappIntPending wappIntLock
fileevent $chan readable {}
if {$wappIntLock} {
# Another instance of request is already running, so defer this one
lappend wappIntPending [list wappInt-handle-request $chan]
return
}
set wappIntLock 1
catch [list wappInt-handle-request-unsafe $chan]
set wappIntLock 0
if {[llength $wappIntPending]>0} {
# If there are deferred requests, then launch the oldest one
after idle [lindex $wappIntPending 0]
set wappIntPending [lrange $wappIntPending 1 end]
}
}
proc wappInt-handle-request-unsafe {chan} {
global wapp
dict set wapp .reply {}
dict set wapp .mimetype {text/html; charset=utf-8}
dict set wapp .reply-code {200 Ok}
dict set wapp .csp {default-src 'self'}
# Set up additional CGI environment values
#
if {![dict exists $wapp HTTP_HOST]} {
dict set wapp BASE_URL {}
} elseif {[dict exists $wapp HTTPS]} {
dict set wapp BASE_URL https://[dict get $wapp HTTP_HOST]
} else {
dict set wapp BASE_URL http://[dict get $wapp HTTP_HOST]
}
if {![dict exists $wapp REQUEST_URI]} {
dict set wapp REQUEST_URI /
}
if {[dict exists $wapp SCRIPT_NAME]} {
dict append wapp BASE_URL [dict get $wapp SCRIPT_NAME]
} else {
dict set wapp SCRIPT_NAME {}
}
if {![dict exists $wapp PATH_INFO]} {
# If PATH_INFO is missing (ex: nginx) then construct it
set URI [dict get $wapp REQUEST_URI]
regsub {\?.*} $URI {} URI
set skip [string length [dict get $wapp SCRIPT_NAME]]
dict set wapp PATH_INFO [string range $URI $skip end]
}
if {[regexp {^/([^/]+)(.*)$} [dict get $wapp PATH_INFO] all head tail]} {
dict set wapp PATH_HEAD $head
dict set wapp PATH_TAIL [string trimleft $tail /]
} else {
dict set wapp PATH_INFO {}
dict set wapp PATH_HEAD {}
dict set wapp PATH_TAIL {}
}
dict set wapp SELF_URL [dict get $wapp BASE_URL]/[dict get $wapp PATH_HEAD]
# Parse query parameters from the query string, the cookies, and
# POST data
#
if {[dict exists $wapp HTTP_COOKIE]} {
foreach qterm [split [dict get $wapp HTTP_COOKIE] {;}] {
set qsplit [split [string trim $qterm] =]
set nm [lindex $qsplit 0]
if {[regexp {^[a-z][-a-z0-9_]*$} $nm]} {
dict set wapp $nm [wappInt-decode-url [lindex $qsplit 1]]
}
}
}
set same_origin 0
if {[dict exists $wapp HTTP_REFERER]} {
set referer [dict get $wapp HTTP_REFERER]
set base [dict get $wapp BASE_URL]
if {$referer==$base || [string match $base/* $referer]} {
set same_origin 1
}
}
dict set wapp SAME_ORIGIN $same_origin
if {$same_origin} {
wappInt-decode-query-params
}
# Invoke the application-defined handler procedure for this page
# request. If an error occurs while running that procedure, generate
# an HTTP reply that contains the error message.
#
wapp-before-dispatch-hook
wappInt-trace
set mname [dict get $wapp PATH_HEAD]
if {[catch {
if {$mname!="" && [llength [info command wapp-page-$mname]]>0} {
wapp-page-$mname
} else {
wapp-default
}
} msg]} {
if {[wapp-param WAPP_MODE]=="local" || [wapp-param WAPP_MODE]=="server"} {
puts "ERROR: $::errorInfo"
}
wapp-reset
if {[info command wapp-crash-handler]==""
|| [catch wapp-crash-handler]} {
wapp-reply-code "500 Internal Server Error"
wapp-mimetype text/html
wapp-trim {
<h1>Wapp Application Error</h1>
<pre>%html($::errorInfo)</pre>
}
}
dict unset wapp .new-cookies
}
wapp-before-reply-hook
# Transmit the HTTP reply
#
set rc [dict get $wapp .reply-code]
if {$rc=="ABORT"} {
# If the page handler invokes "wapp-reply-code ABORT" then close the
# TCP/IP connection without sending any reply
wappInt-close-channel $chan
return
} elseif {$chan=="stdout"} {
puts $chan "Status: $rc\r"
} else {
puts $chan "HTTP/1.1 $rc\r"
puts $chan "Server: wapp\r"
puts $chan "Connection: close\r"
}
if {[dict exists $wapp .reply-extra]} {
foreach {name value} [dict get $wapp .reply-extra] {
puts $chan "$name: $value\r"
}
}
if {[dict exists $wapp .csp]} {
set csp [dict get $wapp .csp]
regsub {\n} [string trim $csp] { } csp
puts $chan "Content-Security-Policy: $csp\r"
}
set mimetype [dict get $wapp .mimetype]
puts $chan "Content-Type: $mimetype\r"
if {[dict exists $wapp .new-cookies]} {
foreach {nm val} [dict get $wapp .new-cookies] {
if {[regexp {^[a-z][-a-z0-9_]*$} $nm]} {
if {$val==""} {
puts $chan "Set-Cookie: $nm=; HttpOnly; Path=/; Max-Age=1\r"
} else {
set val [wappInt-enc-url $val]
puts $chan "Set-Cookie: $nm=$val; HttpOnly; Path=/\r"
}
}
}
}
if {[string match text/* $mimetype]} {
set reply [encoding convertto utf-8 [dict get $wapp .reply]]
if {[regexp {\ygzip\y} [wapp-param HTTP_ACCEPT_ENCODING]]} {
catch {wappInt-gzip-reply reply chan}
}
} else {
set reply [dict get $wapp .reply]
}
puts $chan "Content-Length: [string length $reply]\r"
puts $chan \r
puts -nonewline $chan $reply
flush $chan
wappInt-close-channel $chan
}
# Compress the reply content
#
proc wappInt-gzip-reply {replyVar chanVar} {
upvar $replyVar reply $chanVar chan
set x [zlib gzip $reply]
set reply $x
puts $chan "Content-Encoding: gzip\r"
}
# This routine runs just prior to request-handler dispatch. The
# default implementation is a no-op, but applications can override
# to do additional transformations or checks.
#
proc wapp-before-dispatch-hook {} {return}
# This routine runs after the request-handler dispatch and just
# before the reply is generated. The default implementation is
# a no-op, but applications can override to do validation and security
# checks on the reply, such as verifying that no sensitive information
# such as an API key or password is accidentally included in the
# reply text.
#
proc wapp-before-reply-hook {} {return}
# Process a single CGI request
#
proc wappInt-handle-cgi-request {} {
global wapp env
foreach key [array names env {[A-Z]*}] {dict set wapp $key $env($key)}
set len 0
if {[dict exists $wapp CONTENT_LENGTH]} {
set len [dict get $wapp CONTENT_LENGTH]
}
if {$len>0} {
fconfigure stdin -translation binary
dict set wapp CONTENT [read stdin $len]
}
dict set wapp WAPP_MODE cgi
fconfigure stdout -translation binary
wappInt-handle-request-unsafe stdout
}
# Process new text received on an inbound SCGI request
#
proc wappInt-scgi-readable {chan} {
if {[catch [list wappInt-scgi-readable-unsafe $chan] msg]} {
puts stderr "$msg\n$::errorInfo"
wappInt-close-channel $chan
}
}
proc wappInt-scgi-readable-unsafe {chan} {
upvar #0 wappInt-$chan W wapp wapp
if {![dict exists $W .toread]} {
# If the .toread key is not set, that means we are still reading
# the header.
#
# An SGI header is short. This implementation assumes the entire
# header is available all at once.
#
dict set W .remove_addr [dict get $W REMOTE_ADDR]
set req [read $chan 15]
set n [string length $req]
scan $req %d:%s len hdr
incr len [string length "$len:,"]
append hdr [read $chan [expr {$len-15}]]
foreach {nm val} [split $hdr \000] {
if {$nm==","} break
dict set W $nm $val
}
set len 0
if {[dict exists $W CONTENT_LENGTH]} {
set len [dict get $W CONTENT_LENGTH]
}
if {$len>0} {
# Still need to read the query content
dict set W .toread $len
} else {
# There is no query content, so handle the request immediately
dict set W SERVER_ADDR [dict get $W .remove_addr]
set wapp $W
wappInt-handle-request $chan
}
} else {
# If .toread is set, that means we are reading the query content.
# Continue reading until .toread reaches zero.
set got [read $chan [dict get $W .toread]]
dict append W CONTENT $got
dict set W .toread [expr {[dict get $W .toread]-[string length $got]}]
if {[dict get $W .toread]<=0} {
# Handle the request as soon as all the query content is received
dict set W SERVER_ADDR [dict get $W .remove_addr]
set wapp $W
wappInt-handle-request $chan
}
}
}
# Start up the wapp framework. Parameters are a list passed as the
# single argument.
#
# -server $PORT Listen for HTTP requests on this TCP port $PORT
#
# -local $PORT Listen for HTTP requests on 127.0.0.1:$PORT
#
# -scgi $PORT Listen for SCGI requests on 127.0.0.1:$PORT
#
# -remote-scgi $PORT Listen for SCGI requests on TCP port $PORT
#
# -cgi Handle a single CGI request
#
# With no arguments, the behavior is called "auto". In "auto" mode,
# if the GATEWAY_INTERFACE environment variable indicates CGI, then run
# as CGI. Otherwise, start an HTTP server bound to the loopback address
# only, on an arbitrary TCP port, and automatically launch a web browser
# on that TCP port.
#
# Additional options:
#
# -fromip GLOB Reject any incoming request where the remote
# IP address does not match the GLOB pattern. This
# value defaults to '127.0.0.1' for -local and -scgi.
#
# -nowait Do not wait in the event loop. Return immediately
# after all event handlers are established.
#
# -trace "puts" each request URL as it is handled, for
# debugging
#
# -debug Disable content compression
#
# -lint Run wapp-safety-check on the application instead
# of running the application itself
#
# -Dvar=value Set TCL global variable "var" to "value"
#
#
proc wapp-start {arglist} {
global env
set mode auto
set port 0
set nowait 0
set fromip {}
set n [llength $arglist]
for {set i 0} {$i<$n} {incr i} {
set term [lindex $arglist $i]
if {[string match --* $term]} {set term [string range $term 1 end]}
switch -glob -- $term {
-server {
incr i;
set mode "server"
set port [lindex $arglist $i]
}
-local {
incr i;
set mode "local"
set fromip 127.0.0.1
set port [lindex $arglist $i]
}
-scgi {
incr i;
set mode "scgi"
set fromip 127.0.0.1
set port [lindex $arglist $i]
}
-remote-scgi {
incr i;
set mode "remote-scgi"
set port [lindex $arglist $i]
}
-cgi {
set mode "cgi"
}
-fromip {
incr i
set fromip [lindex $arglist $i]
}
-nowait {
set nowait 1
}
-debug {
proc wappInt-gzip-reply {a b} {return}
}
-trace {
proc wappInt-trace {} {
set q [wapp-param QUERY_STRING]
set uri [wapp-param BASE_URL][wapp-param PATH_INFO]
if {$q!=""} {append uri ?$q}
puts $uri
}
}
-lint {
set res [wapp-safety-check]
if {$res!=""} {
puts "Potential problems in this code:"
puts $res
exit 1
} else {
exit
}
}
-D*=* {
if {[regexp {^.D([^=]+)=(.*)$} $term all var val]} {
set ::$var $val
}
}
default {
error "unknown option: $term"
}
}
}
if {$mode=="auto"} {
if {[info exists env(GATEWAY_INTERFACE)]
&& [string match CGI/1.* $env(GATEWAY_INTERFACE)]} {
set mode cgi
} else {
set mode local
}
}
if {$mode=="cgi"} {
wappInt-handle-cgi-request
} else {
wappInt-start-listener $port $mode $fromip
if {!$nowait} {
vwait ::forever
}
}
}
# Call this version 1.0
package provide wapp 1.0